How to choose a dishcloths? How to use dishcloths?

Family cleaning, rags play a major role, but always be people do not pay attention to, a lot of people because the home rags are old towels, old clothes, sticky oil stains are also difficult to clean, not easy to dry, easy to become a breeding ground for bacteria. So the choice of rags is very important, next we can look at how to choose their own rags and how to learn to use rags it!china konjac sponge

Specifically, the rag should basically maintain the proper softness, cleanliness, not too hard, and should not be sticky wet feeling, especially should not appear obvious unclean marks. It is recommended that people decide whether or not to change the cloths depending on how clean they are, and try to change them once every two or three months. In particular, rags that frequently come into contact with tableware should be boiled in boiling water with a little alkali for no less than five minutes a week or so.cellulose dishcloth wholesale

It is recommended that rags be used, but they can also be used appropriately according to the materials used. For example, in addition to the special cleaning cloths sold in supermarkets, rags can also be chosen from the traditional sponge pulp, which removes stains and is also very environmentally friendly. For other uses, rags can be chosen from materials such as cotton and non-woven; there are disposable paper rags that are convenient but inevitably produce a certain amount of waste.scrubber wholesale

Finally, when choosing rags, try to choose light colors. For example, some people's rags are as soft and white as a towel, and cleanliness is certainly not a problem; some people's rags are darker in color, and stains are not obvious, which makes it difficult to ensure cleanliness. In addition, light-colored rags will have fewer chemical dyes than darker ones, especially if they come into contact with utensils and cooked food, choose white.

How to use a rag:

Dry Wiping: Some surfaces such as high-grade paint, copper, and stainless steel surfaces should not be wet wiped frequently. Dry wiping cloth can be used to wipe, the operation should be gently wiped to remove fine dust. If you dry wipe hard, it will produce static electricity attached to the dust.

Semi-dry cleaning:For not suitable for frequent wet cleaning, but dry cleaning is difficult to clean the surface, you can use a piece of half-wet half-dry rag to clean.

Oil treatment rag method: impregnate the rag with a little petroleum-based oil, this use of rags to stick dust affects good results.

Wet wiping: Remove dust and dirt from the surface of buildings and furniture. Widely used wet rags can be dissolved in water and have a good effect in removing dust, and are often used to clean dirty rags and keep them clean. In addition, the rags should not have too much water.

Wiping with detergent: For dirt containing grease and oil, first wipe with a rag dipped in detergent, then use a washed rag to remove the detergent residue.